Your browser is out of date.

You are currently using Internet Explorer 7/8/9, which is not supported by our site. For the best experience, please use one of the latest browsers.

View Quote (0)
Login
DEI1032-G

DEI1032-G

The ARINC 429 Line Driver Circuit is a bipolar monolithic IC designed to meet the requirements of several general aviation serial data bus standards. These include the differential bipolar RZ types such as ARINC 429, ARINC 571, and ARINC 575 as well as the differential NRZ types such as RS-422.


Add to Quote Data Sheet

Features

  • ARINC 429 Line Driver for high speed (100KHz) and low speed (12.5KHz) data rates.
  • Low EMI RS-422 Line Driver mode for data rates up to 100 KHz.
  • Adjustable Slew rates via external capacitors.
  • Inputs TTL and CMOS Compatible.
  • Low Quiescent Power of 125mW (typical)
  • Programmable output differential range via VREF pin.
  • Outputs have no internal source resistor and fuse.
  • Drives full ARINC load of 400Ω and 0.03µF.
  • -55°C to +85°C operating temperature range.
  • 100% Final testing

Attributes

temp range: -55°C - 85°C
product package type: 16 SOIC NB G
burn in:
channels: 1
power supply range: +/-15
Years to EOL: 10
output resistance: 0
Digital PSU: 5
package description: 16 Pin Plastic SOIC - .150 Body
package type: Surface Mount
JEDEC: MS-012-AC
RoHS:
Product Status: Active

Function Description The ARINC 429 Line Driver Circuit is a bipolar monolithic IC designed to meet the requirements of several general aviation serial data bus standards. These include the differential bipolar RZ types such as ARINC 429, ARINC 571, and ARINC 575 as well as the differential NRZ types such as RS-422. The DEI1032 operates in either ARINC 429 mode or RS-422 mode as controlled by the 429/422' pin. In 429 mode, the serial data is presented on DATA(A) and DATA(B) inputs in the dual rail format of the DEI1016. The driver is enabled by the SYNC and CLOCK inputs. The output voltage level is programmed by the VREF input and is normally tied to +5VDC along with V1 to produce output levels of +5 volts, 0 volts, and –5 volts on each output for ±10 volts differential outputs. In 422 mode, the serial data is presented on DATA(A) input. The driver is enabled by the SYNC and CLOCK inputs. The outputs swing between 0 volts and +5 volts if VREF is at +5VDC. The DEI1032 AOUT and BOUT outputs have 0Ω of series resistance and require external series resistors which are typically used to implement a transient voltage protection network. The outputs are not fused. The output slew rate is controlled by external timing capacitors on CA and CB. Typical values are 75pF for 100KHz data and 500pF for 12.5KHz data.

Get in Touch